Is Your Car Overheating? Here are a Few Reasons and Common Fixes

Your car getting overheated is one of the worst-case scenarios. When your engine’s temperature rises more than the average level, it indicates some issues with your engine’s cooling system. Overheating places tremendous stress on your engine and neglecting it is a big mistake. Ignoring it for a long time leads to significant damages resulting in a full engine replacement or other auto repair services. Here we’ve listed a few reasons why your car’s engine may be overheating.

The three most significant pieces of the cooling system are,

– The radiator

– The hoses

– The water pump

If you encounter a malfunction or a detect failure in any one of these components, it’ll result in a failed engine cooling system, which leads to overheating. You must take your car to an auto repair shop in Puyallup immediately to fix the issue.

A Leakage in the Cooling System

A leak within the cooling system can result in engine overheating. It can occur at any point in the chain of components, including the radiator, the hoses, water pump, head gasket, or thermostat housing. The leakage in the cooling system allows air to enter the system, and it eventually forms an airlock. This affects the regular circulation of the coolant and results in engine overheating. The sooner you hire an auto service in Puyallup to address the issue, the lesser it costs to fix it.

Issues with Your Radiator

For the radiator to be in a good working condition, the following conditions must exist:

– No leakage or clog in the radiator

– There must be sufficient airflow through the radiator while driving

– A high performing thermostat

When there is a leak or clog in the radiator, it doesn’t allow the coolant to pass efficiently into or out of the radiator and results in engine overheating. Likewise, when there is no steady supply of airflow through the radiator while driving, it can’t effectively dissipate the heat, and the excess heat backs up into the engine. In this case, your car gets overheated when it’s idle or in bumper to bumper traffic.

Even though the thermostat isn’t a part of the radiator, it works directly with the radiator. It controls the amount of coolant entering and leaving the radiator. When there is a problem with the thermostat and gets stuck closed, it leads to engine overheating. In this case, you can fix or replace the thermostat, and it could save you more.

Blocked Hoses

The sediment and dirt from the breakdown and erosion of the coolant results in choked hoses, which impedes the flow of coolant and decreases the efficiency of your car’s cooling system. When the coolant couldn’t move through the hoses, it can lead to engine overheating, and you must have the coolant flushed out to fix this.

An Inefficient Water Pump

A faulty waterpump is responsible for poor coolant circulation and leads to engine overheating. You must replace the water pump to fix the issue.

Visit to get a professional car or fleet repair service in Puyallup.

The author of this article is a leading auto repair professional and has over a decade of experience in auto service in Puyallup. In this article, he lists the reasons why your car’s engine gets overheated. Visit for more details.

Leave a Reply

Your email address will not be published. Required fields are marked *