4 Common Misconceptions About Gas Detection


Oil and gas companies must make ongoing training imperative for their personnel to be familiarised with advancing gas detection capabilities. This allows the workers to be aware of the best practises they need to adopt for maximum safety. They must be fully prepared to work in a hazardous environment and not cloud their judgement by specific misconceptions. Here are 7 common myths that everyone needs to know about gas detection:

Myth 1: Ongoing Training Isn’t a Necessity

Not true. It is really important to repeatedly refresh everyone’s memory on the important health and safety precautions that must be followed all the time. One could harness the complete potential of a gas detection system such as the Simtronics GD10P only when you know the ins and outs of it.

Training should be provided on calibration and maintenance of the gas detector, operating the equipment, technological limitations (if any), and more. It’s quintessential that everyone should remain updated on the new safety standards pertaining to the oil and gas industry.

Myth 2: Regular Calibration & Bump Tests are a Waste of Time

Absolutely not! Gas detection systems must be properly calibrated and subjected to bump tests every time before use. Some equipment might have self-bump testing present, however a manual bump test is still recommended.

Performing calibration and testing on a daily basis will let you know if the system is operational and can detect high levels of combustible gases without fail. Since sensors have a limited life span, calibration can help you analyse the condition of the same.

Myth 3: It’s Fine to Use an Old Gas Detector

While all gas detectors meet the minimum standards of usage, some models such as the Simtronics GD10P will perform better than the others in terms of durability, response time, design, and more.

Investing in a high-quality gas detector is necessary, if durability and longevity is your priority. Such devices can endure harsh environments and are less prone to breakdowns. Not to mention, the Simtronics GD10P detector will be highly efficient in identifying hazardous gas leaks and preventing adversities.

Myth 4: “I Can Detect Gas Leakages by Myself”

Perhaps this is the most outrageous myth of them all. One of the most common toxic gases found in industrial establishments is hydrogen sulphide (H2S). Prolonged exposure to even lower concentration of this gas can affect olfactory nerves. Similarly, higher levels of H2S leads to dizziness and instant collapse in just a breath or two. Therefore, relying on your senses is never an option with regards to gas leaks.

Now that you are aware of the common myths described above, educating yourself and others about the safety practices relating to gas detection is vital. Give enough protection to hazardous workspaces with the proper installation and maintenance of a hydrocarbon infra red point gas detector with powerful capabilities.

The author is working in a recognised oil company for over 4 years. In this article, he debunks some common myths about gas detection using a hydrocarbon infra red point gas detector in hazardous work environments. To know more, visit https://prodetec.com.au/

Leave a Reply

Your email address will not be published. Required fields are marked *